• Chromatech Scientific

Tapped and Apparent Density Testing Instrument


PT-TD300 is used to test the tapped (or “tamped”) density and apparent density of powders, granules, pigments and similar products in compliance with the current USP <616> methods 1 and methods 2 as well as with EP <2.9.34>, DIN EN ISO 787-11 and ASTM B527. The instrument automatically calculates the tapped density, Hausner flowability ratio and Carr compressibility index after each test and documents the results via the integrated protocol printer.

Features:
  • Fully compliant to USP <616> methods 1 and methods 2 as well as with EP <2.9.34>, DIN EN ISO 787-11 and ASTM B527

  • Determine tapped density and apparent density

  • Connect a balance to determine the sample weight (optional, weight can be entered manually)

  • Connect USB flash drive to copy methods, store test reports, install optional firmware updates and to restore factory settings

  • Integrated protocol printer

  • User management system

  • Method management system

#Tappeddensity #tamperdensity #apparentdenisty

0 views

© 2015 by Chromatech Scientific Pty Ltd.